Skip to content

oscar-stack/vagrant-hosts

Repository files navigation

vagrant-hosts

Manage vagrant guest local DNS resolution.

Build Status

Synopsis

The vagrant-hosts plugin provides a hosts provisioner which assembles hosts file content based on explicit information and private_network settings. Dynamic sources of hostname info, such as DHCP or provider-specific SSH info are currently not considered.

Provisioner Settings

These settings are on a per provisioner basis. They configure the individual behaviors of each provisioner instance.

  • hosts
    • Description: An array of tuples containing:
      • An IP address
      • A list of hostnames match with that address. These entries may use special keys as described in the next section.
    • Default: []
  • exports
    • Description: A hash containing named lists of [address, [aliases]] entries that are exported by this VM. These exports can be collected by other VMs using the imports setting. These entries may use special keys as described in the next section.
    • Default: {}
  • imports
    • Description: A list of named exports to collect from other VMs.
    • Default: []
  • autoconfigure
    • Description: A boolean which controls whether hosts are pulled in from other machines.
    • Default: true if hosts is empty, otherwise false.
  • add_localhost_hostnames
    • Description: A boolean which controls whether the hostname of the machine is added as an alias for 127.0.1.1
    • Default: true
  • change_hostname
    • Description: A boolean which controls whether the hostname of the machine will be set during provisioning.
    • Default: true
  • sync_hosts
    • Description: A boolean which controls whether running the hosts provisioner causes an update on all other running machines. This also happens during machine destruction.
    • Default: false

Special Keys

The tuples used by the hosts and exports settings are of the form:

[address, [aliases]]

For each component, there are some special keys defined that will be replaced by data determined from the VM.

For address, the following special keys may be used:

  • @facter_ipaddress: Expands to the IPv4 address assigned to the default network interface of the guest VM.

  • @vagrant_private_networks: Expands to create one host entry with the given aliases for each private network attached to a VM that has an explicitly configured ip address. This is similar to the autoconfigure setting, but gives control over which aliases are used.

  • @vagrant_ssh: Expands to the IP address that vagrant ssh uses to connect with the VM.

For aliases, the following special keys may be used:

  • @vagrant_hostnames: Expands to an array of aliases containing:

Example Usage

Manually specify addresses:

Vagrant.configure('2') do |config|
  config.vm.box = "puppetlabs/ubuntu-14.04-64-nocm"

  config.vm.provision :hosts do |provisioner|
    # Add a single hostname
    provisioner.add_host '10.0.2.2', ['myhost.vagrantup.internal']

    # Or a fqdn and a short hostname
    provisioner.add_host '10.0.2.3', ['myotherhost.vagrantup.internal', 'myotherhost']

    # Or as many aliases as you like!
    provisioner.add_host '10.0.2.5', [
      'mypuppetmaster.vagrantup.internal',
      'puppet.vagrantup.internal',
      'mypuppetmaster',
      'puppet'
    ]
  end
end

Autodetect internal network addresses and autoconfigure hosts:

# Autoconfigure hosts. This will copy the private network addresses from
# each VM and update hosts entries on all other machines. No further
# configuration is needed.
Vagrant.configure('2') do |config|

  config.vm.define :first do |node|
    node.vm.box = "puppetlabs/ubuntu-14.04-64-nocm"
    node.vm.network :private_network, :ip => '10.20.1.2'
    node.vm.provision :hosts, :sync_hosts => true
  end

  config.vm.define :second do |node|
    node.vm.box = "puppetlabs/ubuntu-14.04-64-nocm"
    node.vm.network :private_network, :ip => '10.20.1.3'
    node.vm.provision :hosts, :sync_hosts => true
  end
end

Use autodetection with manual entries

Vagrant.configure('2') do |config|

  config.vm.define :first do |node|
    node.vm.box = "puppetlabs/ubuntu-14.04-64-nocm"
    node.vm.network :private_network, :ip => '10.20.1.2'
    node.vm.provision :hosts do |provisioner|
      provisioner.autoconfigure = true
      provisioner.sync_hosts = true
      provisioner.add_host '172.16.3.10', ['yum.mirror.local']
    end

  end

  config.vm.define :second do |node|
    node.vm.box = "puppetlabs/ubuntu-14.04-64-nocm"
    node.vm.network :private_network, :ip => '10.20.1.3'
    node.vm.provision :hosts do |provisioner|
      provisioner.autoconfigure = true
      provisioner.sync_hosts = true
      provisioner.add_host '172.16.3.11', ['apt.mirror.local']
    end
  end
end

Use exports and special keys to share names among VMs:

Vagrant.configure('2') do |config|

  # A node running in a remote compute environment, such as AWS or OpenStack.
  config.vm.define :cloud do |node|
    node.vm.provision :hosts do |provisioner|
      provisioner.sync_hosts = true
      provisioner.exports = {
        'global' => [
          ['@vagrant_ssh', ['@vagrant_hostnames']],
        ],
      }
    end
  end

  # A node running locally under Virtualbox
  config.vm.define :local do |node|
    node.vm.provision :hosts do |provisioner|
      provisioner.sync_hosts = true
      provisioner.imports = ['global', 'virtualbox']
      provisioner.exports = {
        'virtualbox' => [
          ['@vagrant_private_networks', ['@vagrant_hostnames']],
        ],
      }
    end
  end
end

Vagrant Commands

The vagrant-hosts plugin provides two Vagrant commands:

  • vagrant hosts list: List private_network host info in /etc/hosts format
  • vagrant hosts puppetize: List private_network host info as Puppet Host resources

Supported Platforms

As of version 1.0.0 or later Vagrant 1.1 is required.

Supported guests:

  • POSIX
  • Windows

Installation

vagrant plugin install vagrant-hosts